Yo ni siquiera tengo ya disquetera, no sabra como hacer esto.Gracias a todos Procesador: AMD Athlon(tm)64 3500 shoket939 Placa base: MSI K8T N2 Chipset: VIA K8T880PRO Bios: Phoenix LTD 6.00 PG LAN: Realtek RTL81698110 Family Gigabit Ethernet NIC integrado en placa Audio: VIA AC97 integrado en placa T.Grafica: NVIDIA GeForce 6200 A-LE (256 MB) Memoria RAM: 2 GB DDR 400 Disco duro: Ide ATA 120Gb DVD: LITE-ON DVD-RAM 16X.
![]()
Add which parts you have working in the categories listed below, or create a new category. ![]() IDE works perfectly. USB 2.0 also perfectly. Sata not tested. Must disable legacy USB devices in BIOS for PS2 mouse and keyboard to work. Note: If AGPGart.kext is not modified QE AND CI are supported with nitanuni.install. ![]() JaS AMD installation with SSE2 SSE3 patch off the DVD had OS X showing correct CPU speed and Ram. Onboard SATA: NO. Onboard USB-2: works as USB 1.1. Onboard Video: not tested. Using Radeon 9600 Pro AGP (shows as PCI), QE CI and OpenGL working out of the box, but video has some issues, must change monitor resolution using boot parameters, mouse tearing artifact, no monitor color calibration. Parallel ATA works but needs Bikedude880s patched APPLEVIAATA.kext to get full speed (it shows as SATA in System Profiler after the patch, needs flag -f at boot parameters). On-board: Realtek ALC AC97 audio, PATA, Marvell-Yukon Gigabit LAN, all work. Disabled USB Support in BIOS and used PS2 adapter on mouse as a temporary fix. Havent found the right driverhack to make them coexist yet (probably on the forums somewhere). Also, possibly due to nforce4 issues, DVD drive must be set to MASTER and target hard drive to SLAVE (mine was on other IDE channel) for the installation disc to load the Installer. In most other configurations, I was getting stuck during boot (of the DVD) with IOATAwaiting for root errors. Jas 10.4.8 Amd Intel Sse2 Sse3 V1P Mac Driver ForJas 10.4.8 Amd Intel Sse2 Sse3 V1P Driver For PCImpciCBRelated components: Hawking HWP54G Wirelesss Card (with Ralink.com Mac Driver for PCImpciCB RT256xRT266x), Nvidia 6600GT (not fully tested, but functions). Jas 10.4.8 Amd Intel Sse2 Sse3 V1P Mac OS X 10Used Mac OS X 10.4.8 JAS Intel-AMD-SSE2-SSE3 with PPF1 and PPF2. Drivers for video card needs patching for Nvidia NX8800GT (MSI) but will work regardless in 1024x768 mode. Note: Did not install natively on the system (through bios and booting to the system) but it did install through VMWare to an extra hardrive, then fully booted natively after that, the kexts for video that came with it caused issues so heads up. USB with no patches (tested with 1Gb key bluetooth), onboard ethernet does NOT yet work (listed as IC Plus IP1000 Gigabit ethernet (VEN:13f0 DEV:1023), no go so far. Issues: Nothing shows on PCI bus, Realtek 8169 Ethernet is plugged in but not recognized on PCI bus, but is recognized (used RTL1xxx1.02.pkg), will panic if plugged in or used for a bit -odd. Minor Issues: S1 suspend only works when done manually from keyboard hook. Cant use external USB2.0 Hard drives.Patches are available to fix that issue,just havent tested them myself.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |